Revelation

I making prints now; I've always known about this. My ex-girlfriend Beth and I had talked about this for years, and she had been working on that process for a long time. How to sell other works in tandem with a passive revenue stream from T-shirts, posters, and prints based upon original pieces of work.

Sady Starkiss Sticker “Blast Off!” on external memory drive.

My friend, the tattooist, had given me some information about a printer down in downtown Portland that I might want to get a hold of for making prints looking into that so I can see if I can make cheaper prints than where I'm going out right now. I need to get the cost of those prints down so I can make more of the artwork. Suppose I get more of my prints made out over social media. In that case, I can start swinging other ways from having to actually work out a 9-to-5 job and actually start making money off of passive income rather than active income. That was the most significant point that was a revelation to me. I've been fighting it and fighting it and fighting it for a long while now. I realize I could actually make more money off of making prints off of my work and making original pieces all the time, and then I can spend more time making original pieces there for making prints and then go from there.

The biggest thing that my friend also pointed out to me at the show was that they were the other artists I didn't see there at the opening. I was the only one there.

In the process, my artwork also stood out from the others on the wall, knowing this was his description, not mine. But massive black-and-white pieces have a tendency to stand out amongst most of the color stuff, so they definitely stood out.

At the same time, a lot of extra work was done on each one of these pieces, whether it be an 8 x 8, a 12 x 16, or an 18 x 24.

Baby Blue Escape. 8”x8” Scratchboard.

People can see the effort that's done in these individual pieces of work. That's the reason why my stuff has a tendency to grab people's attention. My friend had also mentioned to me that if you're doing the work just to crank stuff out, that's one thing. Still, if you're doing it because you're driven to it, which I know I am, I love working on the artwork; it makes me feel creative and whole and gets a lot of ideas out of my head on the paper or on the board in this case.

A whole mess of 8”x8” pieces being prepped for work.

Remember, I have often talked about in previous posts how some artists are stuck in the creative mode and are not trying so much to work on figuring out how to sell themselves. That's where I've been. I need to branch out if I'm ever going to make it as a successful artist. I need to branch out and start focusing on how to not only crank stuff out, putting great ideas out there but allowing pieces to breathe, and that means making prints, T-shirts, posters, and stickers.

Blue The Bulldog Sticker.

Talks, show and revelations

The biggest thing that my friend also pointed out to me at the show was that they were the other artist I didn’t see there at the opening I was the only one there

In the process also was how the artwork stood out from the others on the wall know this was his description not mine. But black and white, especially big, black and white pieces have a tendency to stand out amongst most of the color stuff so they definitely stood out.

12”x16” “Love Machine” now owed by a new collector. Goodfoot Lounge Art Opening Feb 29th, 2024.

At the same time also, there’s a lot of extra work that were done on each one of these pieces whether it be an 8 x 8, a 12 x 16, or an 18 x 24.

People can see the effort that’s done in these individual pieces of work. That’s the reason why my stuff has a tendency to grab people’s attention. My friend had also mentioned to me that if you’re doing the work just to crank stuff out, that’s one thing, but if you’re doing it because you’re driven to it, which I know I am, I love working on artwork, it makes me feel creative and whole and gets a lot of ideas out of my head on the paper or on the board in this case. 

So many more pieces left to mount on wood and varnish. Sorry about the mess. Y’know artists.

Remember have often talked about in previous posts, how are some artists are stuck in the creative mode and not so much and trying to work on figuring out how to sell them selves. That’s where I’ve been. I need to branch out if I’m ever going to make it as an a successful artist I need to branch out and start focusing on how to not only crank stuff out putting great ideas out there but allowing pieces to breathe, and that means by making prints, T-shirts, posters, and stickers. StickerMule

I think that the show was exactly what I needed to have happen to kick me in the ass and start moving again instead of sitting in my little hole coming out from time to time and get some notice.

Less than a week left to go for Half and Half art show!

Hey there, sports fans! Al here with the latest;

Hey, I wanted to let you guys know that the half-and-half show is coming to a close within the next week or so.

A image of the show before opening.

It’s been successful, though no actual artwork was sold, but that wasn’t the point.

The idea was to get the artwork to the public so they could see what I’ve been working on. And the reaction has been fantastic!

With that being said, there are now prints that will be available soon enough, and T-shirts Have already been made based on the image of “Blast Off!” I’m really excited about this because I’m starting to get into the idea of doing posters, prints, and T-shirts again.

T-shirt design based off of “BLAST OFF!” https://www.stickermule.com/u/dff417293639371/item/13258343

I’ve made a few little videos listed here from TikTok and one that is actually a short version from Facebook.

https://www.facebook.com/reel/850885956743417 and just with a little Beastie Boys to add.

Soon, it’ll be time to head back into the show in the limelight again, but before that happens, I will have some other stuff ready to go for that show: the shirts, the prints, it may be an original piece or two.

I’ll have to confirm with my art show partner, Dan Depaolo, to see if he wants to get another table together. Like me, I think he has started to feel the need to get our work back out. There’s so other people can see it, and we work well together selling each other‘s work when the other isn’t there. I will say it’s been fun.

And with that, this kid is out of here, but check out the links for the shirts, and I’ll be making the prints available here soon enough.

Half and Half Art Show - an UPDATE.

Hey there, sports fans, Al here with the latest;

The new month is nearly upon us (it is now).

So the Half and Half Art show is about to race into next week on Tuesday. It had been pushed back one week by the curator, Ace Troy, of the Slingshot Lounge.

Unfortunately, Troy got back to me after I had already made a poster design and set an invite on Facebook and other invites online. But I should say that that should be expected when you’re dealing with other artists. Communication always seems to be lacking when we’re trying to communicate with each other because we’re all involved in our projects. 

Two of the featured pieces for the Half and Half Art show!

That being said, things are moving forward at a good pace. Again, unfortunately, I am done with my three-week vacation. In that time, I have managed to finish off one commission, start another, complete the work set up for the show, and get a couple more pieces and individual pieces done for another show later on, so it is not nearly a lousy vacation as some people might think. 

Blast Off! t-shirt design!

Get Ahead another t-shirt design.

There’s also been some new stuff dealing with T-shirt designs. So I’m excited about that because I haven’t done T-shirts in a while, and these are being made to order, not unlike prints.

Half and Half Art Show!

Hey there, sports fans. Al here with the latest:

Well, it finally happened: I have an art show. The only drawback is I have to share it with another person, so it’s not a solo art show, though this is not a jab at them.

I’ll be sharing the art show with a woman named Amy Gan. She is a photographer.

This brings me to the show's name - The Half and Half Art Show! It brings both illustrative work and photography together in one show.

And in one place I dearly love, the Slingshot Lounge. Not quite my home away from home but close.

It is run by some of the coolest people I know Eric Mims and his wife Jordan Walden.

I have been very fortunate to have known these people who offered me a solo show at the Slingshot by then curator Joey Maes.

The One-Man Show or OMS was a success in so many ways that I can't even count.

So it is always very exciting for me to show there again.

The Log Blog - just a title

Hey there, sports fans, Al here with the latest;

So it’s been a while since I’ve had to post anything or of recent times because now I think it’s getting closer to finishing another piece of artwork. This one’s a promotional poster for Sady Starkiss and Heavy Metal, and I’ve got a couple more pieces left to go for that group of women images.

Sady Starkiss + Heavy Metal in “Kissing Metal” Art Show Poster. 12”x16” scratchboard

After that, I should be finished and completed with the road less traveled for the Pasquini project show. Once that’s completed, it’s a matter of getting out the varnish, letting it air out and dry out, and then getting a hold of Gango Printing so I can have prints ready to go when it comes time to start selling the pieces.

And that’s about it. Not much else to talk about on the Art Front.

And that’s it, and this kid is out of here.

What's been going on?

Hey there, sports fans, Al here with the latest:

Well, I have tried posting something new in the last month, but nothing happened to stick to landing. That is until I decided to take a staycation to work on artwork that had been sorely overlooked and neglected due to moving and other living things.

Image of the Pasquinade Project - “A Pitcher is Worth a 1000 Words” in progress. 18”x24”.

“The Wode Less Traveled” 18”x 24” Scratchboard. The transfer sheet is completed and soon to be scratched out.

So eight out of ten pieces of the Pasquinade Project were finally varnished, and the last two are being completed.

And on top of that, also working on a new poster for Sady Starkiss and Heavy Metal art show.

I still need to come up with a good name for that show. I might christen it "Back, Villain! Show."

I realize that a better-drying group of boxes is needed for off-gassing than cardboard. One day, I can hope to either find a flat file system that I use for the 12" x16" pieces that can accommodate 18" x24" work without breaking the bank.

An image from outside of my apartment of the off-gassing boxes. Need better storage than these.

But I still need to get to that point. But I am always keeping my fingers crossed.

Also, I realized during my staycation (and as delightful as it was not being bothered) I found myself falling into the intoxicating realm of the pure creative process.

During a break after work and heading to a friend's art show on film noir (which was very cool, by the way). My friend Leslie had asked me if I was completed with Richard Parker.

I had said I was done with the work, and it was formatted, but finding a publisher and an editor is very hard.

It reminded me of immensely talented artists I have known over the years, and they just seemed like they couldn't take that last step.

I had fallen into that same trap. It's almost a narcotic, in a way, addicted to creation. Years ago, I had a conversation that touched upon this very topic. And it was hard to stop then as it is now.

Only then was there a difference in the need to create artwork and produce as much as possible? Only back then was a need to express ideas, this time as finished pieces.

I feel that I haven't had the luck of having a show or even being asked to do a show this year seems - odd.

Whatever the reason I am not privy to, I will complete this work and be ready to go.

Spirng is in the Art

Hey Sports fans, Al here with the latest:

 It has been a very productive week for the kid. There is no doubt in my mind that it has been that, close to finishing off, one piece of art (with varnish) and another about ready to be transferred to scratchboard. 

There is no more tremendous excitement than that other than selling a piece of work to an admiring collector. 

But this has been a week of revisiting Richard Parker. Formatting the book has been on too long a hold until a good friend hit me up and asked when the book would be published.

He was right, and I had procrastinated doing it because, in honesty, I didn't want it to be done. 

I loved working on Richard Parker, and closing that book was hard because he had been a part of my adult life. 

I had found other projects to fill in the space, and they all exceeded my goals as an illustrator. And some are bookends for a series to complete, and others are just for fun. 

Page 1 of “Last Monster on EARTH!”

But there seems to be a tide when a (and you'll have to forgive my language) shit ton of work rolling out simultaneously. "Last Monster on EARTH!" is being colored. "The Watery Adventure of Richard Parker" is being formatted for print, and "the Pasquinade Project" has frames ready for pickup for a future show. It seems overwhelming, but I know I can do it without question. Much of my hesitation has been the fact that funds have been limited because of my living situation and the amount of money funneled into just living expenses. 

RP Layout and Formatting

With a recent change in job position and wage increase, I can crank out work to my liking. I will never be completely free of "issues" until I take that final nap, but knowing what will come up and dealing with it ain't so hard. 

And on top of all of that, I'm having fun!

How can you go wrong with that?

Mashup of artwork - Pasquinade Project atop for framing. Poster design for “Krackalack!” the Pasquinade Project on the left. “Freefall” featuring Sady Starkiss and Heavy Metal. And finally in the works, Corpse Cop!

On the Horzion

Hey there, sports fans, Al here with the latest;

Well, I wanted to keep you all in the loop. I've already shared some of this with you in the previous blog, but I wanted to bring up the latest piece with you regarding the poster design for the Pasquinade Project. Regarding how pieces of artwork are moving forward, I've had two individual pieces and two commission pieces coming together fairly quickly. 

Yesterday, as a side note, I was showing a piece of artwork for the poster I was working on for the Pasquinade and showed it to my friend Jacob. He had told me, "Hey man, I'll pay you for that poster." I wasn't going to sell him a poster. I'm not worried about that. 

So we agreed on a trade. "I'll do you a trade when it comes time for me to take the big pieces for the Pasquinade show to be photographed and copied for prints. You can help me take them over, and you get the poster for free."

This way, he helps me out with my show. I get the artwork photographed and moved from one place to another, and he gets a free poster from the deal.

So it works out best for both of us. I'm excited about that, so now I have someone who can help me out, and I'll also help someone who enjoys my work.

On the topic of the show, nothing sells my artwork better than freaking robots (maybe with the exception of a brain in a jar)!

Using Heavy Metal as a character and part of the poster builds up his side of the Sady Starkiss/ Heavy Metal connection.

So there you go, little text, but the art is rockin'!

An I am outta here.

Who is Sady Starkiss?

Simply put, Sady Starkiss was a product of a conversation and a single commission.

In this commission, the idea was to have what my friend referred to as a "Space Nubile." And that was as much information as he gave me. He wanted something with the '50s feel to it. So, I combined a classic Vargas girl pinup and a Wally Wood space girl.

I'm a sucker for old 50s pinup girls, to begin with. And Wally Wood had such a flair for the ladies of the time.

A questionable combination, but I needed the challenge of something new and not just my traditional superhero schlock. I ended up with an old-school control console and some deft gravity-defining clothing. The inside joke was Sady couldn't keep her clothes on.

Of course, this commission led right to the creation of Heavy Metal (an old-school robot based on the old black and white movie The Mysterious Doctor Satan).

Then there was talk of a crossover between the two. There have been a couple, but the best of the crossovers between the two was the piece called "Blast Off!".

Of course, there is also the crossover call entitled "Oh Yeah?" between heavy-metal and CD star kiss, dealing with a Fu Manchu type of character. Even mentioning that there was a Fu Manchu type of character would get me in trouble with people of today, so I will plan on redesigning my version of Fu with a slight change to color and look. He will be villainous, though. That's a mainstay of the character.

But back to Sady.

Initially, she was just eye candy, to be honest, but as I continued to draw her in different situations, I realized that I needed something more for her. I wanted a personality that would encompass her physically with some of her other mental attributes.

I wanted a strong woman who could fight when push came to shove and yet now always overpower her "detractors."

Another female character I found to be of interest is Una Persson from the Micheal Moorcock fantasy series. I felt she was someone I could base some of Sady on.

So I wanted her to be sexy and adventurous. She is the pinnacle of what my Fu Manchu character is looking for, and Heavy Metal always gets in the way. Of course, others want to be with her as well. Robot Monster is one; Corpse Cop is another.

And all of this chaotic craziness is going to be rendered in scratchboard.

What else?